Fixing Fascia – A How To Guide


The fascia are the boards that trim the bottom edge of the roofing, and they typically hold the gutters. Most repairs involve removal of at least part of the fascia, and that implies eliminating the gutters, all while standing on a ladder or scaffolding.

 

Safety

Setting up an extension ladder for fascia repair can be difficult, because its top end can’t lean on the section you are changing. Rather of an extension ladder, it’s preferable to make use of a tall stepladder or set up scaffolding. You’ll need a power saw to cut off any areas of fascia that require to be replaced, however a round saw is harmful, even in knowledgeable hands. It’s better to utilize a reciprocating saw. Building L-brackets for the fascia from 1/2-inch plywood and attaching them prior to getting rid of the old boards, makes it simple to keep the brand-new boards in place while you’re fastening them.

 

Evaluating the Damages

You seldom get a full concept of the amount of rot and damage the fascia have actually sustained up until you climb up and probe with a screwdriver. The lower edge of the fascia is also susceptible to rot, but if that’s the only rot you discover, you must be able to fix it with epoxy filler.

 

Eliminating Fascia

You shouldn’t have too much problem getting off the old fascia. Fascia are typically nailed into the rafters and come off with the assistance of a crowbar, but if they are screwed, back off out the screws with a drill and a No. 2 Phillips bit.

 

Replacing and filling

Epoxy wood filler can repair the ends of any rafters that have actually decomposed, as well as the bottoms of decayed fascia, after first clearing out the rot with a chisel. The majority of fascia boards are 1-by-6-inch exterior-grade lumber, and after cutting yours to size, it’s an excellent idea to prime it and offer it one coat of paint before reattaching it with screws, which are more reputable than nails. The fascia are the boards that cut the bottom edge of the roofing, and they normally hold the rain gutters. The majority of repair works involve removal of at least part of the fascia, and that suggests eliminating the rain gutters, all while standing on a ladder or scaffolding. The lower edge of the fascia is also susceptible to rot, however if that’s the only rot you discover, you need to be able to repair it with epoxy filler. Epoxy wood filler can repair the ends of any rafters that have actually decomposed, as well as the bottoms of decayed fascia, after first clearing out the rot with a chisel.

Leave a comment